18cf stainless steel tumble dryer. See demo video in description - Free Shipping

Description

CRCfilters - Used - Tumble Dryer Demo
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Demo video can be seen here   https://vimeo.com/570477565
Used-good condition. Tumble dryer with molecular sieve column, air cooled condenser and 55 gallon collection drum. Tumble dryer currently set up for atmospheric pressure but can be used under vacuum with an appropriate condenser and collection tank. Vessel is jacketed and set up for low pressure steam or hot water heating. Tumble dryer is attached to a Hydraulic lift which raises for unloading. Dryer can be easily detached with slide pin for easier mobility. Both hydraulic lift and tumbler dryer are mounted on wheels. All components use camlock quick connects for attachment.
Previously used since new for removal and recovery of residual ethanol from extracted hemp. Current set up is for atmospheric operation without vacuum. Air cooled condenser eliminates the need for a chiller.
Primary components include
Stainless steel tumble dryer vessel
Hydraulic lift
Air cooled condenser
25lb molecular sieve column with jacket for water removal from ethanol
55 gallon stainless steel fluid collection drum with stand
Operation controls including variable speed and forward / reverse control
Overall features
.
Stainless steel construction for all product touching parts
Ethanol compatible food grade hose for vapor and fluid transfer
18cf
total volume
Hydraulic lift and tumble dryer are mounted on wheels for mobility
Variable speed control 0-60 RPM
Forward and reverse control
Stationary Internal forks and paddles for constant agitation during rotation
Jacketed vessel for low pressure steam or hot water heating
10 gauge stainless steel vessel / tank
Max raised height from floor to bottom of vessel / tank 60”
Electrical requirements
Condenser fan – single phase,
120v – 2.1 amps
Hydraulic lift – single phase, 120v – 6.25 amps
Tumble dryer control/motor – three phase,
240/208 – 3.3 amp
Requirements to operate / assembly
NOT INCLUDED
- 40kw low pressure boiler for steam and steam lines
NOT INCLUDED
- 14” flexible exhaust ducting to exterior
Condenser cradle support is removed for shipping. Bolts directly to tumbler cage with supplied bolts.
Condenser rests in cradle and does not require bolting
All steam and vapor lines are set up with camlock quick connect for all components so no tools are required
Tumble dryer connects to lift with slide pin