600W Wind Turbine Generator Charge Controller 12V/24V Auto IP67 MPPT Regulator

Description

***WELCOME TO GrTech OFFICIAL STORE***
600W Wind Turbine Generator Charge Controller 12V/24V Auto IP67 MPPT Regulator
Best protection to wind turbines, When the battery is fully charged, the brake can be controlled automatically.
When the battery voltage drops to restore voltage level, the wind turbine can automatically recover to the battery charge.
During recharge the controller enables the voltage and current limiting facility for efficient recharge.
For improper operation of positive and negative of the battery, no need to replace the fuse, just reset the +/- point.
Adaptation of the waterproof system will enable the controller to work under heavy cold, humidity and rainy time.
Support battery type: LiFePO4, LFP battery, Lead-Acid and Gel
SIGNIFICANCE
Voltage: AC12V/24V (auto)
Maximum Wind generator power: 0-600W
Wind Generator: AC or DC Wind Turbine Generator
Max Current：33.33A
Waterproof: IP67
Protection: Battery overvoltage protect, wind-generator current limit, wind-generator brake, speed protection
Indicator: LED
Capability: Mode charge
Unloading way: MPPT electrodeless and noiseless unloading
Working temperature: -35℃ +75℃/85% RH (no condensing)
Size: 95x65x20mm
PACKAGE INCLUDE
01 X MPPT Charge Controller
NOTE
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color shown in the pictures.
Please allow 1-2cm measuring deviation due to manual measurement.
***THANK YOU***