Carbon Fiber Vacuum Infusion Starter Kit - Medium Materials Kit

Description

Carbon Fiber Vacuum Infusion Starter Kit - Medium Materials Kit
Selecting the right materials for the vacuum infusion process just got easier with our pre-made kits. These kits include all of the materials you need to give vacuum infusion a try on your own. You can use these kits to produce parts entirely from carbon fiber, Kevlar, fiberglass or any other composite material. You will receive the following materials with the kit. We have 4 different kit sizes that will fit your needs.
This kit includes the standard infusion materials needed to make a part. Since many people are switching over from vacuum bagging and may have a pump or their own fabrics we are just making the kit for the infusion supplies. If you do not have any materials you will need to purchase our complete infusion kit that will have everything you need to make a part. This is not a cheap kit like many places online are selling. These items are the same items used in composite shops across the world. Featuring well known, brand name products from the composite industry as Airtech. General Sealants, CCP, and 3M
This kit contains  the sizes and quantities highlighted in yellow below.
Please visit our eBay store for other sized kits.
Item and Purpose
Small Materials Kit
Medium Materials Kit
Large Materials Kit
Complete Infusion System Kit
Carbon Fiber 2x2 Twill High Density Specialists Fabric - Easy to work with fabric that conforms well and gives great cosmetics.
3 Yards (50"x108")
Stypol 8086 Polyester Infusion Resin - Very thin resin that is specially formulated to flow easily through dense fabrics.
1 Gallon Resin w/ 4oz AXOX Catalyst
CE Flow Media 47" Resin Flow Medium – This goes on top of the peel ply and allows the resin to flow through the part.
2 Yards
4 Yards
8 Yards
4 Yards
Airtech Wrightlon WL5400 Vacuum Bagging Film 60" - This goes over the part and will be secured with tacky tape. Creates an airtight zone to hold materials in place.
3 Yards
5 Yards
10 Yards
5 Yards
Airtech Econostitch Peel Ply 59" - This release coated fabric goes on top of your last layer of fabric to make sure the materials needed to make the part do not stick to your final part. Also gives a slightly textured finished look to the backside of the part.
2 Yards
4 Yards
8 yards
4 Yards
Tacky Tape Sealant - Very sticky tape that is used to make an airtight vacuum seal and will seal any leaks. Comes in 25ft long rolls.
2 Rolls
3 Rolls
5 Rolls
3 Rolls
Spiral Wrap Tubing 3/8" ID / 1/2" OD - Makes channels in your bag where you will direct resin flow
20 Ft
30 Ft
50 Ft
30 Ft
Resin Supply Line and Vacuum Pump Line 3/8" ID - This line is used to transfer resin from the mixed resin bucket to your part inside the bag
10 Ft
20 Ft
30 Ft
20 Ft
Flanged Calmping Pliers - Used to clamp the resin feed line and stop flow of resin.
2 pcs
Barb Fitting For Pump 1/4" NPT Female with fitting for 3/8" ID Line
1 pc
Nylon T-Fittings 3/8" - Creates an attachment point for your feed and vacuum lines to the spiral wrap.
6 pcs
12 pcs
18 pcs
12 pcs
3m Super 77 Spray Adhesive - Used to hold down materials if necessary
1 Can
Vacuum Pump 4-CFM 2-Stage
1 pc
Resin Catch Pot - Provides a storage of vacuum pressure to compensate for pump fluctuations and also creates a break point to prevent resin from being sucked into your vacuum pump.
1 pc
All of these items in the kit are available for purchase individually in our store. If you run out of a certain material we can sell any single item by itself. On our complete kit, you will save over 0 compared to buying everything individually. We take care of your materials and make sure they are always rolled onto tubes for shipment. We have purchased kits from our competitors all over the world and we have received materials that are folded. This can create a pinch point which can put a hole in the bag and cause you endless trouble. As a full time composite shop, we know how you need to receive your materials in order to have the least amount of issues throughout your project.
Copyright  2017 Elite Motoring | All Rights Reserved