EPever MPPT 40A 30A 20A 10A Solar Controller 12V 24V LCD Solar Regulator

Description

EPever MPPT 40A 30A 20A 10A Solar Controller 12V 24V Back-Light LCD Solar Regulator for Max 60V Solar Panel Input
Overview:
The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method. The limitation function of the charging power and current and reducingcharging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.
Features：
Advanced MPPT technology, with efficiency no less than 99.5%\Ultra-fast tracking speed and guaranteed tracking efficiency
Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
Wide MPP operating voltage range
High quality components, perfecting system performance, with maximum conversion efficiency of 98%
Accurate recognition and tracking of multiple-peaks maximum power point
International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
Charging power and current limitation function
Compatible with lead-acid and lithium-ion batteries
Battery temperature compensation function
Real-time energy statistics function
Overheating power reduction function
Multiple load work modes
The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.
With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
Monitor and set the parameters via mobile phone APP or PC software
Full-load operation without any drop in capacity within the range of working environment temperature
Extensive electronic protection
Technical Specifications:
Item
Tracer 1206AN
Tracer 2206AN
Tracer 1210AN
Tracer 2210AN
Tracer 3210AN
Tracer 4210AN
System nominal
voltage
12V/24VDC Auto
Rated charge current
10A
20A
10A
20A
30A
40A
Rated discharge
current
10A
20A
10A
20A
30A
40A
Battery voltage range
8~32V
Max. PV open circuit voltage
46V
92V
MPP voltage range
(Battery voltage +2V)~36V
(Battery voltage +2V)~72V
Max. PV input power
130W/12V
260W/24V
260W/12V
520W/24V
130W/12V
260W/24V
260W/12V
520W/24V
390W/12V
780W/24V
520W/12V
1040W/24V
Self-consumption
<=12mA
Discharge circuit voltage drop
<=0.23V
Temperature compensate coefficient
-3mV/°C/2V (Default)
Grounding
Common negative
RS485 interface
5VDC/100mA
LCD backlight time
60S (Default)
Environmental Parameters
Working environment temperature
-25°C~+50°C(100% input and output)
Storage temperature range
-20°C~+70°C
Relative humidity
<=95%, N.C.
Enclosure
IP30
Dimension
172x139 x 44mm
220x154x 52mm
172x139 x 44mm
220x154x 52mm
228x164x55mm
252x180x63mm
Mounting dimension
130x130mm
170x145mm
130x130mm
170x145mm
170x164mm
210x171mm
Terminal
12AWG(4mm 2 )
6AWG(16mm 2 )
12AWG(4mm 2 )
6AWG(16mm 2 )
6AWG(16mm 2 )
6AWG(16mm 2
Recommended cable
12AWG(4mm 2 )
10AWG(6mm 2 )
12AWG(4mm 2 )
10AWG(6mm 2 )
8AWG(10mm 2 )
6AWG(16mm 2 )
Weight
0.57kg
0.94kg
0.57kg
0.94kg
1.26kg
1.65kg
Photo: