EPEVER MPPT Solar Charge Controller 40A 30A 20A 10A 12V/24V Lead-acid or Lithium

Description

(We have warehouse located in Chicago IL U.S.A, supply on-time shipping and local afterslae services .
)
More informations
please fell free to contact us , we will supply techincal support and asnwer in time .
No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact by eBay message.
Usage Note :
Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly.
Product Models:
Triron1206AN /
Triron1210AN
/ Triron2210AN / Triron3210AN /
Triron4210AN /
Triron4215AN ;
The
TRIRON-N
series MPPT controllers are modular-designed products based on nine MPPT solar controller models. The main unit (Power Module) is a solar controller which can be integrated with different display and interface modules to meet a variety of functional requirements. Among them,
t
he
master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.
Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile,TRIRON controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the
actual working value would not be higher than rated value).
The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION controller can be widely used in RV, telecommunication base station, household system,field monitoring, etc.
Product Features
✦
Self-identifying, load the driver for each module
✦
Support the hot swapping function(only for same model)
✦
Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
✦
Modular design, varied combination to meet different requirements
✦
Ultra-fast tracking speed, and high tracking efficiency ≥99.5%
✦
Accurately tracking and recognizing of multiple MPP
✦
Peak conversion efficiency of 98%
✦
Auto limit function of charging power and charging current
✦
Compatible with lead-acid batteries and lithium batteries
✦
Wide MPP operating voltage range
✦
Full load operation during the working temperature range
✦
Auto reduce power function when charging in high temperature
✦
Multiple load work modes
✦
Battery temperature compensation
✦
Real-time power statistics recording function
✦
Multiple LCD and LED display modules optional
✦
Master-slave interface module design,simultaneously view the controller and inverter operating data
✦
Dry contact design, remotely switch on/off external equipment
✦
Dual USB design, supply DC power for electronic equipment
✦
Perfect electronic protection function
Protection function
✦
PV over current protection
✦
PV short circuit protection
✦
Lithium battery low temperature protection
✦
Night reverse charging protection
✦
Battery reverse polarity protection
✦
PV reverse polarity protection
✦
Battery over discharge protection
✦
Battery over heat protection
✦
Battery over voltage protection
✦
Load short circuit protection
✦
Load overload protection
✦
Controller overheating protection
Electrical parameters
Model
TRIRON 1210N
TRIRON 2210N
TRIRON 3210N
TRIRON 4210N
Nominal system voltage
12/24VDC auto work
Rated charge current
10A
20A
30A
40A
Rated discharge current
10A
20A
30A
40A
Battery input voltage range
8～32V
Max. PV open circuit voltage
TRIRON**10N : 100Vat Min operating environment temp; 92Vat 25℃environment temp
TRIRON**15N :100Vat Min operating environment temp; 138Vat 25℃environment temp
MPP voltage range
TRIRON**10N : (Vbat+2V)～72V
TRIRON**15N : (Vbat+2V)～92V
Max.PV input power
130W/12V
260W/24V
260W/12V
520W/24V
390W/12V
780W/24V
520W/12V
1040W/24V
Battery type
Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User
Lithium battery(LiFePO4 /Li-NiCoMn/User)
◆ Lead-acid batteries
Equalize charging voltage
Sealed: 14.6V, Flooded: 14.8V,
User-defined: 9~17V
Boost charging voltage
Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V,
User-defined: 9~17V
Float charging voltage
Gel /Sealed /Flooded: 13.8V,
User-defined: 9~17V
Low voltage reconnect voltage
Gel /Sealed /Flooded: 12.6V,
User-defined: 9~17V
Low voltage disconnect voltage
Gel /Sealed /Flooded: 11.1V,
User-defined: 9~17V
◆ Li-battery
Boost charging voltage
LiFePO4:14.4V；Li-NiCoMn：12.4V；
User:9-17V
Float charging voltage
LiFePO4: 13.6V；Li-NiCoMn：11.8V；
User:9-17V
Low voltage reconnect voltage
LiFePO4:12.4V；Li-NiCoMn：10.40V；
User:9-17V
Low voltage disconnect voltage
LiFePO4:11.0V；Li-NiCoMn：9.20V；
User:9-17V
Lithium battery
LiFePO4（4S；8S）/Li-NiCoMn（3S；6S）
Self-consumption
≤14mA(12V)
≤15mA(24V)
● Controller can not auto recognize system voltage when battery type is "lithium battery“, please confirm the
system voltage before use.
※ Without equalize charging when the battery type is "lithium battery".
◆ Technical data for 12V system at 25 ℃, twice in 24V system.
Discharge circuit pressure drop
≤0.18V
Temp. compensation
-3mV/℃/2V (Lithium battery has no Temp. compensation)
Grounding
Common negative
RS485 communication interface
5VDC/100mA
USB interface
5VDC/2.2A(total)
Relay interface
30VDC/1A
LCD backlight time
60s(default)
※The Temp. compensation coefficient is 0 When the battery type is "lithium battery“ and can not be changed
Environment parameters
Working environment temperature
-25℃～+55℃（with LCD）
-30℃～+55℃（without LCD）
Storage temperature range
-30℃～+70℃
Humidity range
≤95%,(N.C)
Enclosure
IP30
※ In the working environment temperature range ,Controller can be full load operation .
Mechanical parameters
Model
TRIRON1210N
TRIRON2210N
TRIRON3210N
TRIRON4210N
Dimension
135×180.8×47.3mm
150×216×56.7mm
158×238.3×62.7mm
183×256.8×66.7mm
Terminals
12AWG(4mm²)
6AWG(16mm²)
6AWG(16mm²)
6AWG(16mm²)
Net weight
0.56kg
0.92kg
1.35kg
2.06kg
Accessories (optional)
EPEVER  MPPT Solar Charge Controller 10A/20A/30A/40A ,12V/24V Auto Work ,Max PV 100V solar panel Input Common Negative Grounding with LCD Display Suitable for Lead-Acid (Sealed /GEL/AGM/Flooded ) and Lithium type Batteries
Specification:
Triron120
6
N:
Rated charge current:10A
(12V/24V Auto Work)
Max.PV input power: 130W
for 12V battery or
260W
for 24V battery
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max.PV open circuit voltage:
6
0VDC
Grounding: Common negative
Terminal: 4mm2/12AWG
Recommended cable: 4mm2/12AWG
Triron1210N:
Rated charge current:10A
(12V/24V Auto Work)
Max.PV input power: 130W
for 12V battery or
260W
for 24V battery
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max.PV open circuit voltage: 100VDC
Grounding: Common negative
Terminal: 4mm2/12AWG
Recommended cable: 4mm2/12AWG
Triron2210N:
Rated charge and discharge current: 20A
(12V/24V Auto Work)
Max. PV input power:
260
W
for 12V battery or 520
W
for 24V battery
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 100VDC
Terminal: 6AWG(16mm2 )
Recommended cable:10AWG(6mm2)
Triron3210N:
Rated charge and discharge current: :30A (12V/24V Auto Work)
Max. PV input power:
39
0W
for 12V battery or 78
0W
for 24V battery
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 100VDC
Terminal: 6AWG(16mm2 )
Recommended cable:8AWG(10mm2)
Triron4210N:
Rated charge and discharge current: 40A (12V/24V Auto Work)
Max. PV input power:
52
0W
for 12V battery or 1040
W
for 24V battery
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 150VDC
Terminal: 6AWG(16mm2 )
Recommended cable:6AWG(16mm2)
Triron421
5
N:
Rated charge and discharge current: 40A (12V/24V Auto Work)
Max. PV input power:
52
0W
for 12V battery or 1040
W
for 24V battery
Suitable battery types: Sealed /GEL/AGM/Flooded / lithium-ion
Battery voltage range: 8V~32V
Max. PV open circuit voltage: 150VDC
Terminal: 6AWG(16mm2 )
Recommended cable:6AWG(16mm2)
We have our own warehouse in Chicago IL US , which can promise the fastest delivery speed, and offer the best logistic service for you. No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact by eBay message.
[Usage Note]
Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly.