-40%
EPEVER MPPT Solar Charge Controller 40A 30A 20A 10A+ MT50 Remote Meter + RTS Kit
$ 50.15
- Description
- Size Guide
Description
EPEVER MPPT Solar Charge Controller 40A/30A/20A/10A , 12V/24V Auto, Max PV 100V + Remote Meter MT50 + Temp Sensor Cable RTS300R47K3.81A for Solar Panel Regulatorfor lead-acid and lithium-ion batteries
MAIN FEATURES:
●Advanced MPPT technology, with efficiency no less than 99.5%
●Ultra-fast tracking speed and guaranteed tracking efficiency
●Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
●Wide MPP operating voltage range
●High quality components, perfecting system performance, with maximum conversion efficiency of 98%
●Accurate recognition and tracking of multiple-peaks maximum power point
●International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product
’
s service life
●Charging power and current limitation function
●Compatible with lead-acid and lithium-ion batteries
●Battery temperature compensation function
●Real-time energy statistics function
●Overheating power reduction function
●Multiple load work modes
●The communication port adopts professional protection chip, which can provide 5VDC power supply, and has
over-current and short-circuit protection.
●With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various
●communication requirements in different situations.
●Monitor and set the parameters via mobile phone APP or PC software
●Full-load operation without any drop in capacity within the range of working environment temperature
●Extensive electronic protection
Package List:
1 x MPPT Solar Charge Controller (10A/20A/30A/40A)
1 x Remote meter
MT50
1 x Temp sensor cable
(for battery)
1 x Temp Sensor Unit (for controller)
2 x Use Manual (English)
EPEVER original
supplier in
Chicago IL USA , local warehouse supply in-time shipping and
local team
aftersell services.
Technical Specifications:
Electrical Parameters :
Item
Tracer
1210
A
N
Tracer
2210
A
N
Tracer
3210
A
N
Tracer
4210
A
N
System nominal voltage
12/24VDC
①
Auto
Rated charge current
10A
20A
30A
40A
Rated discharge current
10A
20A
30A
40A
Battery voltage range
8~32V
Max. PV open circuit voltage
100V
②
92V
③
MPP voltage range
(Battery voltage +2V)~
72V
Max. PV input power
130W/12V
260W/24V
260W/12V
520W/24V
390W/12V
780W/24V
520W/12V
1040W/24V
Self-consumption
≤12mA
Discharge circuit voltage drop
≤0.23V
Temperature compensate coefficient
④
-3mV/℃/2V (Default)
Grounding
Common negative
RS485 interface
5VDC/100mA
LCD backlight time
60S (Default)
①When a lead-acid battery is used, the controller hasn’t the low temperature protection.
②At minimum operating environment temperature
③At 25℃ environment temperature
④When a lithium-ion battery is used, the system voltage can’t be identified automatically.
Environmental Parameters:
Working environment temperature
-25℃~+50℃(100% input and output)
Storage temperature range
-20℃~+70℃
Relative humidity
≤95%, N.C.
Enclosure
IP30
◆
The controller can full load working in the w
orking environment temperature
,
When the internal temperature is 81
℃
, the reducing power charging mode is turned on
. Refer to P24.
Mechanical Parameters:
Item
Tracer
1210
A
N
Tracer
2210
A
N
Tracer
3210
A
N
Tracer
4210
A
N
Dimension
172x139 x 44mm
220x154x 52mm
228x164x55mm
252x180x63mm
Mounting dimension
130x130mm
170x145mm
170x164mm
210x171mm
Mounting hole size
Φ5mm
Terminal
12AWG(4mm
2
)
6AWG(16mm
2
)
6AWG(16mm
2
)
6AWG(16mm
2
)
Recommended cable
12AWG(4mm
2
)
10AWG(6mm
2
)
8AWG(10mm
2
)
6AWG(16mm
2
)
Weight
0.57kg
0.94kg
1.26kg
1.65kg
Battery and Load Wire Size:
The battery and load wire size must conform to the rated current, the reference size as below:
Model
Rated charge current
Rated discharge current
Battery wire size
Load wire
size
Tracer
1210AN
10A
10A
4mm
2
/12AWG
4mm
2
/12AWG
Tracer2210AN
20A
20A
6mm
2
/10AWG
6mm
2
/10AWG
Tracer3210AN
30A
30A
10mm
2
/8AWG
10mm
2
/8AWG
Tracer4210AN
40A
40A
16mm
2
/6AWG
16mm
2
/6AWG
Battery type :
L
ead-acid battery
L
ithium
b
attery
1
Sealed(default)
LiFePO4(4s/12V; 8s/24V)
2
Gel
Li(NiCoMn)O2 (3s/12V; 6s/24V)
3
Flooded
User(9~34V)
4
User(9~17V/12V; 18~34V/24V)
Remote Meter
MT50
:
• Automatic identify the controller, and display relevant parameter data
• Large-screen informative LCD displays all the operating data and system working status
• Simple and convenient operation
• Real-time alarm of failure information
• Longer communication distance based on RS485
• Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control
• Battery type selection: Gel, sealed, flooded and User(programable)
• Programmable parameters
• Energy statistics display function
Parameters:
- Self-consumption: Backlight on<23mA, Backlight off <15mA.
- Faceplate dimensions: 98 * 98 mm / 3.86 * 3.86 in.
- Frame dimensions:114 * 114 mm / 4.49 * 4.49 in.
- Connector type: RJ45.
- Meter cable : 2m.
- Net weight: 0.190 Kg.
Temperature Sensor Cable (RTS300R47K3.81A )
Line length:9.84ft
Connector: 0.0125ft /2P
Testing temperature: -131℉~257℉
If the controller not connectd the TS-R, the default setting for battery charging/discharging temperature is 25 °C without temperature compensation
---------------------------------------------------------------------------------