EPEVER MPPT Solar Charge Controller DS2+UCS Modular Solar Regulator 12V/24V Auto

Description

EPEVER MPPT Solar Charge Controller 10A/20A/30A/40A ,12V/24V Auto Work Solar Panel Max PV 100V, Common Negative Grounding with LCD Display Solar Panel Charger Regulator DS2 + UCS Intelligent Modular-Designed Regulator for Lead-Acid (Sealed, AGM, Gel, Flooded ) and Lithium Battery
The TRIRON series controllers are modular-designed products based on nine MPPT solar controller models. The main unit (Power Module) is a solar controller which can be integrated with different display and interface modules to meet a variety of functional requirements. Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.
Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile, TRIRON controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the actual working value would not be higher than rated value).
The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION controller can be widely used in RV, telecommunication base station, household system, field monitoring, etc.
Product Features:
•
Self
-
identifying, load the driver for each module
•
Modular design, varied combination to meet different requirements
•
Support the hot swapping function(only for same model)
•
Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
•
Ultra
-
fast tracking speed, and high tracking efficiency ≥99.5%
•
Accurately tracking and recognizing of multiple MPP
•
Peak conversion efficiency of 98%
•
Auto limit function of charging power and charging current.
•
Compatible with lead
-
acid batteries and lithium batteries
•
Wide MPP operating voltage range
•
Full load operation during the working temperature range
•
Auto reduce power function when charging in high temperature
•
Multiple load work modes
•
Battery temperature compensation
•
Real
-
time power statistics recording function
•
Multiple LCD and LED display modules optional
•
Master
-
slave interface module design, simultaneously view the controller and inverter operating data
•
Dry contact design, remotely switch on/off external equipment
•
Dual USB design, supply DC power for electronic equipment
•
Perfect el
ectronic protection function
Protection function :
• PV over current protection • PV short circuit protection
• PV reverse polarity protection • Night reverse charging protection
• Lithium battery low temperature protection
• Battery over heat protection • Controller overheating protection
• Battery reverse polarity protection
• Battery over discharge protection • Battery over voltage protection
• Load short circuit protection • Load overload protection
Package List:
1 X MPPT Solar Charge Controller 10A/20A/30A/40A (UCS + DS2 modules)
1 X Temperature sensor（Model:RT-MF58R47K3.81A）
for controller
1 X Manual (English)
*************************************************************************************************************************************************
LCD display :
LCD display the detailed operating data of the controller including:
voltage, current, power, capacity etc., and set part parameters.
Co-use with the RCM interface module, can synchronously display the operating data of the inverter.
Interface module :
UCS module ;
Output type
U (short for USB):USB output，provide power to DC devices
C (short for COM): with COM port
S (short for SLAVE) :Controller as slave, PC software & mobile APP can remotely monitor the controller status through this port
Accessories:
This kind of controller can connect with this part item use:
1,Remote Meter(MT50):Set the controller parameter via the LCD display
2,Data logger (eLOG01):Real-time parameter recording of the product through the RS485 communication mode
3,Bluetooth adapter(Box-BLE-01):with 2m communication cable( for the controller with RS485 port )
4,WIFI adapter(eBox-WIFI-01):with 2m communication cable( for the controller with RS485 port )
5,Remote temperature sensor : RTS300R47K3.81A(3m)
6,Communication cable : CC-USB-RS485-150U-22AWG,USB to RS485 PC communication cable (1.5m)
Software :
PC software,Mobile APP (For Andriod System).
************************************************************************************************************************************************
MPPT Solar Charge Controller 10 Amps
Triron1206N
Model: Triron1206
N
Rated charge and discharge current :10 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 130W charge for 12V battery system or 2600W charge for 24V battery system
Max. PV open circuit voltage:60V(at minimum operating environment temperature) ;46V(at 25℃ environment temperature)
Grounding : Common negative
Battery type : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Lithium battery: LiFePO4 / Li-NiCoMn / User .
Battery input voltage range : 8～32V
MPP voltage range:V(BAT+2V)～36V
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+55℃(100% input and output)
Storage Temperature Range: -30°C -- +70°C/-4°F -- 158°F
Humidity range :≤95%,(N.C)
Enclosure:IP30
LCD backlight time:
60s(default)
Controller Terminals:#12AWG(4mm2) ;
Dimension:135*180.8*47.3mm ; Weight :0.56 KG
MPPT Solar Charge Controller 20 Amps
Triron2210N
Model: Triron2210N
Rated charge and discharge current :20 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 260W charge for 12V battery system or 520W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) ;92V(at 25℃ environment temperature)
Grounding : Common negative
Battery type : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Lithium battery: LiFePO4 / Li-NiCoMn / User .
Battery input voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+55℃(100% input and output)
Storage Temperature Range: -30°C -- +70°C/-4°F -- 158°F
Humidity range :≤95%,(N.C)
Enclosure:IP30
LCD backlight time:
60s(default)
Controller Terminals:#6 AWG(16mm2) ;
Dimension:150*216*56.7mm ; Weight :0.92 KG
MPPT Solar Charge Controller 30 Amps
Triron3210N
Model: Triron3210N
Rated charge and discharge current :30 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 390W charge for 12V battery system or 780W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) ;92V(at 25℃ environment temperature)
Grounding : Common negative
Battery type : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Lithium battery: LiFePO4 / Li-NiCoMn / User .
Battery input voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+55℃(100% input and output)
Storage Temperature Range: -30°C -- +70°C/-4°F -- 158°F
Humidity range :≤95%,(N.C)
Enclosure:IP30
LCD backlight time:
60s(default)
Controller Terminals:#6 AWG(16mm2) ;
Dimension:158*238.8*62.7mm ; Weight :1.35 KG
MPPT Solar Charge Controller 40 Amps
Triron4210N
Model: Triron4210N
Rated charge and discharge current :40 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) ;92V(at 25℃ environment temperature)
Grounding : Common negative
Battery input voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Battery type : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Lithium battery: LiFePO4 / Li-NiCoMn / User .
Working environment temperature : -25℃～+55℃(100% input and output)
Storage Temperature Range: -30°C -- +70°C/-4°F -- 158°F
Humidity range :≤95%,(N.C)
Enclosure:IP30
LCD backlight time:
60s(default)
Controller Terminals:#6 AWG(16mm2)
Dimension:256.8*183*66.7mm ; Weight :2 KG
MPPT Solar Charge Controller 40 Amps
Triron4215N
Model: Triron4215N
Rated charge and discharge current :40 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system
Max. PV open circuit voltage:150V(at minimum operating environment temperature) ;138V(at 25℃ environment temperature)
Grounding : Common negative
Battery input voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Battery type : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Lithium battery: LiFePO4 / Li-NiCoMn / User .
Working environment temperature : -25℃～+55℃(100% input and output)
Storage Temperature Range: -30°C -- +70°C/-4°F -- 158°F
Humidity range :≤95%,(N.C)
Enclosure:IP30
LCD backlight time:
60s(default)
Controller Terminals:#6 AWG(16mm2)
Dimension:256.8*183*66.7mm ; Weight :2.06 KG
***********************************************************************************************************************
Electrical Parameters:
Item
TRIRON 1206N
TRIRON 2206N
TRIRON 1210N
TRIRON 2210N
TRIRON 3210N
TRIRON 4210N
TRIRON 4215N
System nominal voltage
12/24VDC Auto
①
Rated charge current
10A
20A
10A
20A
30A
40A
40A
Rated discharge current
10A
20A
10A
20A
30A
40A
40A
Battery voltage range
8
～
32V
Max. PV open circuit voltage
60V
②
46V
③
100V
②
92V
③
150V
②
138V
③
MPP voltage range
(Battery voltage +2V)
～
36V
(Battery voltage +2V)
～
72V
(Battery voltage +2V)
～
108V
Max. PV input power
130W/12V 260W/24V
260W/12V 520W/24V
130W/12V 260W/24V
260W/12V 520W/24V
390W/12V 780W/24V
520W/12V 1040W/24V
520W/12V 1040W/24V
Self-consumption
≤14mA(12V)
；
≤15mA(24V)
Discharge circuit voltage drop
≤0.18V
Temperature compensate coefficient
④
-3mV/
℃
/2V (Default)
Grounding
Common negative
RS485 interface
5VDC/100mA
USB interface
5VDC/2.2A(Total)
Relay interface
30VDC/1A
Backlight time
60S (Default)
①When a lead-acid battery is used, the controller hasn’t the low temperature protection.
②At minimum operating environment temperature
③At 25℃ environment temperature
④When a lithium-ion battery is used, the system voltage can’t be identified automatically.
Environmental Parameters :
Working environment temperature※
-25
℃
～
+55℃(LCD) -30℃
～
+55℃
（
No LCD
）
Storage temperature range
-20℃
～
+70℃
Relative humidity
≤95%, N.C
Enclosure
IP30
※
The controller can full load working in the working environment temperature, When the internal temperature is 81℃,
the reducing power charging mode is turned on. Refer to P36.
Original EPEVER MPPT solar charge controller 10A/20A/30A/40A and Accessories supply by GolandCentury in U.S.A warehouse