EPEVER MT50 Remote Meter for MPPT Solar Charge Controller Tracer-AN Triron-N

Description

EPEVER MPPT solar charge controller
original
supplier wareshouse in
Chicago IL US , in stock from 2020-10-20 , supply fast shipping and
local team
aftersales services .
Remote Meter MT50 :
【Specifications】
New Release (SV2.16+HV1.7)Remote Meter MT50 for MPPT solar charge controller ,only fit for EPsolar and EPEVER brand controllers ,(Old version (SV1.32+HV1.60)MT-50 is not suitable for Triron-N, Tracer-AN new Controller)
MT50 is an optional remote meter to monitor and program EPsolar controller.
Compatible with: EPsolar / EPEVER
Tracer-AN,
Tracer-BN, Triron-N, eTracer, iTracer ,
LS-B, LS-BP, VS-BN series controllers,
not fit for Renogy, Host or others brand controller .
Features:
● Automatic identify the controller, and display relevant parameter data
● Large-screen informative LCD displays all the operating data and system working status
● Simple and convenient operation
● Real-time alarm of failure information
● Longer communication distance based on RS485
● Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control
● Battery type selection: Gel, sealed, flooded and User(programable)
● Programmable parameters
● Energy statistics display function
Technical Data:
Faceplate dimension:98×98 mm / 3.86×3.86 inch
Frame dimension:114×114 mm / 4.49×4.49 inch
Connector type: RJ45
Meter cable:Standard 2m,Max 50m
Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F
Package :
1x MT50 Remote Meter
1x Wall Mounting Board
1x 2M Cable
4x Mounting Screws
[Quality Guarantee]
No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact by eBay message.
[Usage Note]
Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly.