MPPT-6048 Solar Charge Controller 12V / 24V / 36V / 48V charging controller 60A

Description

Please note that please read all manuals before installing them.
1) Keep the controller away from water. Do not wipe the controller with a wet towel.
2) Keep the wiring correct and do not reverse the wiring. Please pay attention to the wiring sequence of the terminal blocks.
3) Keep the ambient temperature of the controller from - 22 ℃ ~ + 55 ℃. Avoid direct sunlight.
4) It can maintain good heat dissipation performance.
5) Use pure copper wire and connect all polarities correctly
6) The load output is only applicable to the current with DC load less than 5A.
7) If you are not professional, please do not set any parameters, because the controller can work normally by default, except for lithium battery.
Item
Parameter
Model No.
ICharger MPPT 6048
Charging type
Level 3: constant current (MPPT), constant voltage, floating
System voltage
12/24/36/48/Auto
Maximum photovoltaic input power
(720*n)W
Maximum photovoltaic input
voltage
180 Voc
Battery voltage automatic
Identification: 48V battery
DC40V~DC60V
Overcharge protection
Voltage: 48V battery
60V
Current limiting protection
61A
Maximum efficiency
≥98.1%
Photovoltaic utilization
≥99%
Protection function
Temperature protection
75℃
Fan on temperature
>45℃
Fan off temperature
<40℃
Features
Size（
MM
）
214x115x50
N.W.(
kg
）
1.1
G.W.（
kg
）
1.2
Electromagnetic compatibility
Accord to EN61000, EN55022, En55024
Shell
IP21
Ambient temperature
-20℃ ~ +55℃
Storage temperature
-40℃ ~ +75℃