PWM Solar Laderegler Controller Panel 10A-100A Daul USB LCD Batterie Regler

Description

Product Description
PWM Solar Laderegler Controller Panel 10A-100A Daul USB LCD Batterie Regler
Features:
*100% brand new and high quality
*Charge one 12V/24V lithium battery, super wide charging and discharging adjustable
*The minute is adjustable when the output is turned off, which is more convenient (there is no setting when the market is only available).
*Built-in over-heat, over-current, short-circuit, no-load protection, debugging, control auto-recovery
*Two-way MOS tube anti-backflow circuit, high power charging mode, extremely low heat.
*R5.0 solar charging DC connector, R5.0 DC lamp output DC connector, easy to connect
*Always keep the battery in the filling voltage.
*Prevent the battery from being overcharged.
*Prevent battery over-discharge.
*Prevent the battery from charging back to solar panels at night.
* Reverse battery protection
*Reverse polarity protection for solar panels
*When the battery voltage is low, the controller will automatically cut off the load from the system. When the battery voltage is back to normal and the load works again.
*According to the battery voltage level, the controller can automatically adjust the charge-off voltage, charge-off voltage and load recovery voltage. (The parameter is below 25℃ by default
State locked by CPU procedure cannot be adjusted.)
*The controller will automatically compensate the charging voltage temperature according to the ambient temperature changes.
*Thunder Protection
Details:
Material: PVC
Size: 187*93*43mm
Color: orange + black
Current: 10A, 20A, 30A, 40A, 60A, 80A, 100A
Waterproof level: IP32
Model: PWM
Voltage: DC 12V / 24V
Display: LCD screen
Own consumption: <10MA
Overcharge Protection: 14.4V/28.8V
Overcharge trickle charge: 13.7V / 27.4V
Charge recovery voltage: 12.6V/25.2V
Over Discharge Protection: 10.7V/21.4V
Over-Discharge Recovery: 12.6V/25.2V
Dual USB output: 5V/2A (charge cell phone, etc.)
Working temperature: -35℃-60℃
12V for 18V solar panel, 24V for 36V solar panel
12.0 volt lead-acid battery equivalent
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
12.8 volt lithium iron phosphate battery equivalent
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
11.1 volt lithium battery equivalent
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
Package includes:
1 x solar charge controller
1 * User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.
On Oct 13, 2022 at 01:14:37 PDT, seller added the following information: